Drain Repair Melbourne
Cracked, broken, or collapsed drains - diagnosed and repaired properly
A damaged drain doesn’t fix itself. Cracks get bigger, roots grow in, and what starts as a slow drain ends up as a sewage backup. We repair drains across Melbourne using CCTV diagnosis to find the exact problem, then fix it with either no-dig relining or targeted excavation - whichever suits your situation and budget.
Call 1300 303 247 for same-day service.
Common drain damage we repair
Drain pipes fail for a few predictable reasons. Age is the biggest one - terracotta pipes installed in the 1950s and 60s have a lifespan of about 50-70 years, and most of them are past it. Tree roots exploit the cracks and joints. Ground movement from Melbourne’s reactive clay soils shifts pipes out of alignment.We also fix drains damaged by construction work (someone drove a post through the pipe), vehicle loads over shallow pipes, and poor previous repairs that have failed.
Signs your drain needs repair
These symptoms suggest your drain is damaged, not just blocked:
- Blockages that keep recurring in the same drain line after clearing
- Sewage smell that persists even after the drain has been cleared
- Sinkholes, soft patches, or depressions in the yard above the drain path
- Greener grass over the sewer or drain line compared to the rest of the lawn
- CCTV inspection showing cracks, breaks, displaced joints, or root intrusion
How we repair drains
We offer two repair methods and we’ll recommend the right one for your situation.
- CCTV inspection - Every repair starts with a camera. We need to see what’s damaged, where it is, and how bad it is. No point guessing when a camera gives you the answer in 30 minutes.
- Method 1: Pipe relining (no dig) - For cracked pipes, root-damaged joints, and minor structural damage. The liner seals the damage from inside without any excavation. Best for pipes under driveways, gardens, and slabs.
- Method 2: Excavation and replacement - For collapsed pipes, severe misalignment, or sections that can’t be relined. We dig down to the damage, replace the affected section with new PVC, and reinstate the surface.
- Verification - After repair, we run the camera again to confirm the fix. You get before-and-after footage.
Why Choose Drainpro?
- No-dig first approach - We try to reline before digging. Less disruption, often cheaper, and a 50-year warranty on the liner.
- Accurate diagnosis - CCTV on every job means we know exactly what’s damaged. No unnecessary work.
- All repair types - We do relining, spot repairs, full section replacements, and junction repairs.
- Fixed quoting - Drain repair is quoted as a fixed price based on the camera findings. No surprise bills.
- 25+ years of repairs - We’ve fixed thousands of drains across Melbourne. We know what works long-term.
Frequently Asked Questions
How much does drain repair cost in Melbourne?
It depends on the method and the job. Relining is usually the cheaper option because there’s no digging involved. Excavation and replacement costs more depending on depth, pipe length, and what’s on the surface above it. We quote a fixed price after the CCTV inspection so you know exactly what you’re up for before any work starts.
Can you repair drains without digging?
In most cases, yes. Pipe relining repairs cracks, joint failures, and root damage from inside the pipe - no excavation needed. The only time we dig is when the pipe has completely collapsed or is too badly misaligned for a liner.
How do you know if a drain needs repair or just clearing?
The CCTV camera tells us. If the pipe is structurally sound, clearing the blockage is enough. If there are cracks, breaks, or joint displacement, the pipe needs repair to prevent the problem recurring.
How long does drain repair take?
Relining takes 1 to 2 days. Excavation takes 2 to 5 days depending on depth and the surface above (garden is faster than concrete). We give you a timeline when we quote.
Do you repair stormwater drains as well?
Yes. We repair both sewer and stormwater drain pipes. Stormwater repairs follow the same process - CCTV inspection first, then relining or excavation depending on the damage.
Get a Free Quote
Call 1300 303 247 - fixed pricing, no surprises.
Drain Repair Melbourne - service in action
Frequently Asked Questions
How much does drain repair cost in Melbourne?
It depends on the method and the job. Relining is usually the cheaper option because there's no digging involved. Excavation and replacement costs more depending on depth, pipe length, and what's on the surface above it. We quote a fixed price after the CCTV inspection so you know exactly what you're up for before any work starts.
Can you repair drains without digging?
In most cases, yes. Pipe relining repairs cracks, joint failures, and root damage from inside the pipe - no excavation needed. The only time we dig is when the pipe has completely collapsed or is too badly misaligned for a liner.
How do you know if a drain needs repair or just clearing?
The CCTV camera tells us. If the pipe is structurally sound, clearing the blockage is enough. If there are cracks, breaks, or joint displacement, the pipe needs repair to prevent the problem recurring.
How long does drain repair take?
Relining takes 1 to 2 days. Excavation takes 2 to 5 days depending on depth and the surface above (garden is faster than concrete). We give you a timeline when we quote.
Do you repair stormwater drains as well?
Yes. We repair both sewer and stormwater drain pipes. Stormwater repairs follow the same process - CCTV inspection first, then relining or excavation depending on the damage.
Our Recent Work
Drain Repair Melbourne
